[MacTUG] Fusion drives and deploystudio

[Donald Duff-McCracken]

This question is mainly for the CS crew as I noticed this comment in their wiki: https://cs.uwaterloo.ca/twiki/view/CF/MacImageDeployment


“When Apple introduced the fusion drive it caused a particular error in image deployment with DeployStudio<https://cs.uwaterloo.ca/twiki/view/CF/DeployStudio>. This link explains the problem and offers a resolution. http://pivotallabs.com/a-deploystudio-workflow-for-late-2012-imacs/”


Is this still an issue?

Addtionally has anyone don a “DIY” fusion drive in deploystudio with an SSD and normal Hard disk?


------------------------------------
Donald Duff-McCracken
Technical Services Manager
Mapping, Analysis & Design
Faculty of Environment
University of Waterloo
(519) 888-4567 x32151
https://uwaterloo.ca/environment-computing/about/people
------------------------------------
This email communication is intended as a private communication for the sole use of the primary addressee and those individuals listed for copies in the original message. The information contained in this email is private and confidential and If you are not an intended recipient you are hereby notified that copying, forwarding or other dissemination or distribution of this communication by any means is prohibited.  If you are not specifically authorized to receive this email and if you believe that you received it in error please notify the original sender immediately.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.uwaterloo.ca/pipermail/mactug/attachments/20160707/d7c72387/attachment.html>