[MacTUG] Avoid ARD 3.9

[Donald Duff-McCracken]

Wow was it a hassle! One of those “you cant get here from there” moments.

Upgraded ARD on my machine to 3.9 then could not upgrade clients from 3.85 to 3.9 as they could not talk to ARD!!! Fortunately I had a second boot disk with ARD 3.85 on it and was able to talk to my client macs, pushed the 3.9 client out, rebooted to my normal disk and all was well. But what a mess!


------------------------------------
Donald Duff-McCracken
Technical Services Manager
Mapping, Analysis & Design
Faculty of Environment
University of Waterloo
(519) 888-4567 x32151
https://uwaterloo.ca/environment-computing/about/people
------------------------------------
This email communication is intended as a private communication for the sole use of the primary addressee and those individuals listed for copies in the original message. The information contained in this email is private and confidential and If you are not an intended recipient you are hereby notified that copying, forwarding or other dissemination or distribution of this communication by any means is prohibited.  If you are not specifically authorized to receive this email and if you believe that you received it in error please notify the original sender immediately.


From: <mactug-bounces at lists.uwaterloo.ca> on behalf of Dani Roloson <daroloso at uwaterloo.ca>
Date: Monday, February 27, 2017 at 3:17 PM
To: MacTUG <mactug at mailman.uwaterloo.ca>
Subject: [MacTUG] Avoid ARD 3.9

Googling lists various problems.
Updating the client on your machine forces you to update the admin.
You might have to rely on Bomgar if you've already updated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.uwaterloo.ca/pipermail/mactug/attachments/20170227/91b1eeb2/attachment.html>