[MacTUG] OmniPrint - UW wireless printing tutorial

[Donald Duff-McCracken]

Hi Marlon

Those instructions seem clear, but it is too bad that getting the Advanced Tab to show up is such a pain!

Other than that, my only concern is passing the password in the URL makes me squeamish, even if you have clearly told people only to do that on a secure network. It still gives me the willies. Hopefully people will not do this in crowded locations on campus ;-)
------------------------------------
Donald Duff-McCracken
Technical Services Manager
Mapping, Analysis & Design
Faculty of Environment
University of Waterloo
(519) 888-4567 x32151
http://www.environment.uwaterloo.ca/computing/people/don.html
------------
To request help from MAD please us "Request Tracker". For info see: http://www.fes.uwaterloo.ca/computing/faculty_staff/
------------
This email communication is intended as a private communication for the sole use of the primary addressee and those individuals listed for copies in the original message. The information contained in this email is private and confidential and If you are not an intended recipient you are hereby notified that copying, forwarding or other dissemination or distribution of this communication by any means is prohibited.  If you are not specifically authorized to receive this email and if you believe that you received it in error please notify the original sender immediately.
________________________________________
From: mactug-bounces at lists.uwaterloo.ca [mactug-bounces at lists.uwaterloo.ca] on behalf of Marlon A. Griffith [m3griffi at engmail.uwaterloo.ca]
Sent: Wednesday, May 25, 2011 3:17 PM
To: macTug
Subject: [MacTUG] OmniPrint - UW wireless printing tutorial

I helped with the mac instructions for this IST service which provides instructions for wireless printing  on campus.

http://ist.uwaterloo.ca/cs/omniprint/
_______________________________________________
MacTUG mailing list
MacTUG at lists.uwaterloo.ca
https://lists.uwaterloo.ca/mailman/listinfo/mactug